
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X30SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X30SBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It yields 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. The short C-clip and riveted body design radically reduces axial footprint compared to conventional round-body units.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod (-B). The M14x1.5 male rod end couples directly to tooling, while the 16 mm rod operates within a hard-anodized bore. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X30SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum engine blocks during machining operations, utilizing the 628.3 N extend force to lock parts firmly against locators.
Drives mechanical arms to tuck corrugated box flaps prior to tape sealing, where the 30 mm stroke and male M14x1.5 rod mount directly to folding blades.
Actuates routing paddles on a parcel handling line, benefiting from the short body depth to fit within tight conveyor frame gaps.
When sizing this 40 mm bore, stepping down to a 32 mm bore drops the 0.5 MPa push output to 402.1 N, while stepping up to a 50 mm bore increases it to 981.8 N. Verify your load falls comfortably within the 879.6 N push capacity available at 0.7 MPa.
This ACQ40X30SBT is configured with a NPT1/8 port, a male M14x1.5 rod end, and a magnetic piston for reed or electronic switches. Note that a standard compact cylinder drifts if air pressure is lost; applying an external rod lock or pilot-operated check valve is necessary for fail-safe load holding.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628.3 N push and 527.8 N pull. At 0.7 MPa, push increases to 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa and runs at speeds of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends instead of adjustable cushions; external shock absorbers are recommended for high-energy loads. It includes a magnet (-S) for AirTAC reed or electronic switches, and features a male M14x1.5 threaded rod end (-B).
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.