
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X30ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X30ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics, delivering a robust 628.3 N push and 527.8 N pull at 0.5 MPa. Its C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to traditional round-body units, saving valuable machine footprint. The 40 mm bore features a hard-anodized inner wall and a 16 mm piston rod.
This specific model includes the S option, meaning it has a built-in piston magnet for position sensing via AirTAC reed or electronic switches mounted in the body grooves. End-stopping relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, so high-energy cycles may require slowing the approach or adding external shock absorbers. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X30ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures printed circuit board panels during routing operations, utilizing the 628.3 N extend force to prevent vibration while fitting neatly into tight electronics manufacturing cells.
Drives the mechanical arms that fold minor flaps on packaging lines, where the 30 mm stroke and compact body depth prevent interference with adjacent conveyor machinery.
Acts as a positive stop for 40-series aluminum extrusion profiles on assembly tables, using the integrated magnet to confirm positioning to the PLC.
Choosing this 40 mm bore involves balancing force and spatial limits; it provides 628.3 N push at 0.5 MPa, sitting neatly between the smaller 32 mm bore (402.1 N push) and the larger 50 mm bore (981.8 N push). When ordering, confirm the 30 mm stroke, NPT1/8 porting, female M8x1.25 rod thread, and the required S magnet for switch readiness. The standard stroke ceiling for this bore is 100 mm.
Keep in mind that a standard double-acting compact cylinder drifts if air pressure drops or the valve is centered, as the NBR bumper only decelerates the piston near stroke end without locking it. If your application demands fail-safe load holding, incorporate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion; for high-speed cycles, you should slow the approach or add external shock absorbers. The S option denotes a built-in magnet compatible with AirTAC reed or electronic switches fitted into the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.