
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X30T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X30T is a double-acting JIS compact single-rod air cylinder engineered for tight axial spaces. Its C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body alternatives, saving valuable machine mounting depth. Operating at 0.5 MPa, it provides 628.3 N of push force and 527.8 N of pull force, peaking at a 128 kgf maximum push at 1.0 MPa.
This 40 mm bore unit integrates a fixed NBR elastomer bumper at each end to absorb end-stop impact, meaning it lacks a field-adjustable air cushion. The hard-anodized aluminum bore ensures longevity, while the Ø16 mm piston rod features a standard female M8x1.25 thread. Though this specific configuration ships without a magnet, the body retains peripheral grooves for adding position sensing if upgraded later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X30T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a short diverter gate on a packaging conveyor, using its 628.3 N extend force to push heavy cartons onto a secondary belt without occupying excessive frame width.
Secures aluminum castings inside a CNC machining center, where the compact C-clip body minimizes Z-axis interference and the 30 mm stroke delivers rapid clamping action.
Presses small bearings into housings on an automated assembly line, relying on the fixed NBR bumper to soften the end-stop impact during repetitive high-speed cycles.
When sizing your actuator, stepping down to the 32 mm bore yields 402.1 N of push force at 0.5 MPa, whereas stepping up to the 50 mm bore provides 981.8 N. The ACQ40X30T strikes a middle ground for moderate loads, utilizing a NPT1/8 port and a 30 mm stroke. Remember that a plain double-acting cylinder drifts when air is lost or a valve is centered; the fixed NBR bumper only decelerates the rod near stroke end rather than locking it. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the essentials: 40 mm bore, 30 mm stroke, female M8x1.25 rod end, NPT1/8 port, and no sensor magnet. If your application demands male rod threading, append the B option code to the model number.
Quick checklist
At 0.5 MPa, the 40 mm bore provides 628.3 N of push (extend) force and 527.8 N of pull (retract) force. At 0.7 MPa, the push force is 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
No, the ACQ40X30T uses a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. For high-energy cycles, you should slow the approach or add an external shock absorber. Additionally, it does not hold its position if air pressure is lost; the rod will drift, so an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.