
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X35BFBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X35BFBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, drastically reducing axial mounting depth where a conventional round-body unit would not fit. It generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it a robust mid-range choice for automated machinery.
This specific configuration features a male-thread M14x1.5 piston rod end for direct load coupling, paired with an FB mounting bracket for secure body fixation. The 40 mm bore utilizes a NPT1/8 port and relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable. The body includes machined grooves for positioning sensors, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X35BFBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N push stroke needed to positively fold and seal corrugated carton flaps on high-speed packaging lines without excessive axial bulk.
Drives diverter arms on conveyor networks to route heavy pallets, utilizing the male M14x1.5 thread for a rigid mechanical linkage to the guide arm.
Applies steady 0.5 MPa thrust to seat small bearings or bushings into housings, where the fixed NBR bumper quietly arrests the 35 mm stroke end.
When sizing this 40 mm bore, stepping down to a 32 mm bore yields 402.1 N of push at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N. Keep in mind that a standard double-acting cylinder like this drifts when air pressure is lost or the valve is centered, as the fixed bumper only decelerates the piston near the stroke end and does not function as a lock. For a fail-safe hold, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 40 mm bore, 35 mm stroke, NPT1/8 port, FB mount, male M14x1.5 rod thread, and no magnet.
Quick checklist
This 40 mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the impact. Because this is a fixed bumper and not an adjustable air cushion, you cannot tune the deceleration on the fly; for high-speed or high-energy loads, slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.