
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X35BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X35BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod body to minimize axial mounting depth. It provides 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it a robust choice for mid-range actuation. The unit features a 16 mm piston rod and a NPT1/8 port.
This specific model includes a male-thread M14x1.5 rod end for direct mechanical coupling to your tooling. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable. The body retains magnetic-switch grooves for future sensing upgrades, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X35BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force at 0.5 MPa to secure machining pallets in automated CNC cells, utilizing the male M14x1.5 thread for direct fixture mounting.
Drives folding arms on case sealing lines where the short 35 mm stroke and compact body depth prevent interference with adjacent packaging machinery.
Actuates routing gates on parcel conveyors, with the fixed NBR bumper absorbing the impact of the 30-500 mm/s travel speed at the end of the stroke.
When sizing your actuator, consider stepping down to the 32 mm bore (402.1 N push at 0.5 MPa) for lighter duty, or up to the 50 mm bore (981.8 N push at 0.5 MPa) if you need greater thrust. Remember that a standard ACQ body does not hold its position or load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates it near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 40 mm bore, 35 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
No, the ACQ40X35BT uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.