
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X35SBLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X35SBLBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It yields 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. The short C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body alternatives, minimizing machine footprint.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, an LB mounting bracket interface, and a male M14x1.5 threaded rod end for direct load coupling. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, so high energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X35SBLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force to secure mid-weight aluminum pallets onto a vertical machining center sub-table.
Drives a 35 mm stroke folding arm on a continuous flow case sealer, using the male M14x1.5 thread for rigid blade mounting.
Actuates a routing flap on a parcel sorting line, where the compact C-clip body saves axial depth inside the conveyor frame.
This 40 mm bore generates 628.3 N push at 0.5 MPa. If you need less force, the 32 mm bore provides 402.1 N; if your application demands more thrust, the 50 mm bore offers 981.8 N. When ordering, confirm the 40 mm bore, 35 mm stroke, NPT1/8 port, male M14x1.5 rod thread, LB mount, and the integrated magnet.
Note that a plain ACQ cylinder does not hold its position or load when air pressure drops or the valve is centered. The rod drifts, and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding, specify an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end, not an adjustable air cushion. For high-speed impacts, add an external shock absorber. Additionally, it does not hold a load on air loss; you need an external rod lock or pilot-operated check valve for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.