
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X35SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X35SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, drastically reducing axial footprint compared to standard round-body options. Delivering 628.3 N of push force at 0.5 MPa, it utilizes a 16 mm piston rod and a NPT1/8 port for efficient pneumatic integration.
This specific configuration includes an internal magnet (-S) for position sensing and a male-thread rod end (-B) sized at M14x1.5 for direct mechanical coupling. The hard-anodized aluminum bore relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X35SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a routing flap on a high-speed packaging conveyor, using the 628.3 N extend force to push heavy cartons onto auxiliary tracks without excessive axial depth.
Drives a secondary ejector pin plate in a plastics molding cell, where the male M14x1.5 rod threads directly into the tooling for rapid part release.
Secures aluminum engine blocks during machining operations, relying on the 527.8 N retract force to pull a toggle clamp safely out of the cutter path.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm version (402.1 N push at 0.5 MPa) for lighter duties, or moving up to the 50 mm bore (981.8 N push at 0.5 MPa) if your application requires greater thrust. To finalize your order, confirm the 35 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the built-in magnet.
Note that a standard ACQ body cannot maintain a load if air pressure drops or the directional valve centers; the rod will drift. For fail-safe vertical holding, an external rod lock or pilot-operated check valve must be installed separately.
Quick checklist
This 40 mm bore cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, extending to 879.6 N push at 0.7 MPa, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
End-stop energy is managed by a fixed NBR elastomer bumper, which is not field-adjustable; for high kinetic energy loads, add an external shock absorber. The built-in magnet allows tracking via AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.