
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X35ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X35ST is a double-acting single-rod JIS compact cylinder engineered for space-constrained pneumatics. Delivering 628.3 N of push force at 0.5 MPa, it uses a short C-clip and riveted piston-to-rod body design that significantly reduces axial mounting depth compared to traditional round-body units. The 40 mm bore features a hard-anodized inner wall and a 16 mm piston rod with a female M8x1.25 end thread.
This unit includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches fitted into the sensor grooves around the body. Deceleration is handled by a fixed NBR elastomer bumper at each end; because this is not an adjustable air cushion, high-energy cycles may require external shock absorption. The cylinder operates at 30-500 mm/s with a NPT1/8 port. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X35ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates sliding machine tool doors where the short 35 mm stroke and compact body depth keep the carriage clear of the working envelope.
Drives the side flaps of corrugated boxes on a packaging line, utilising the 628.3 N push force to fold heavy cardboard smoothly.
Pushes lightweight goods onto a secondary conveyor lane, relying on the integrated magnet for precise end-of-stroke sensor feedback.
When sizing your pneumatics, stepping down to the 32 mm bore yields 402.1 N push at 0.5 MPa, while stepping up to the 50 mm bore provides 981.8 N push at 0.5 MPa, giving you clear boundaries for your 628.3 N requirement. To confirm your ordering essentials for this model: specify the 40 mm bore, 35 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the required magnetic switch option.
Keep in mind that a standard ACQ body does not hold its position or load if air pressure drops or the control valve is centred; the rod will drift, and the fixed NBR bumper only decelerates the stroke near the end stops. If your fixture must maintain a locked position without live pressure, you must integrate an external rod lock or a pilot-operated check valve into the circuit.
Quick checklist
This 40 mm bore cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and the standard stroke limit for this bore is 100 mm.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than adjustable air cushions, so high-speed cycles may need external shock absorbers. Additionally, it does not hold a load if air is lost; the piston drifts and requires an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.