
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X35T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X35T is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to standard round-body units, saving valuable mounting depth within tight machine envelopes. The hard-anodized aluminum bore ensures extended operational life.
This specific 40 mm bore configuration features a 16 mm piston rod, a female M8x1.25 rod-end thread, and a NPT1/8 air supply port. Deceleration at the stroke extremes relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be specified for high kinetic energy loads. Although this particular unit ships without a magnet, the body retains peripheral grooves for adding position sensing on future iterations. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X35T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Securing raw aluminum castings onto a 5-axis machining center platter, utilizing the 628.3 N extend force to resist cutting vibration during aggressive roughing operations.
Driving the mechanical folding arms on a continuous motion case erector, where the 35 mm stroke rapidly tucks minor flaps prior to hot melt adhesive application.
Actuating a pneumatic routing flap on a modular conveyor line to shift heavy automotive component totes into a secondary packaging lane.
When sizing this 40 mm bore, stepping down to an ACQ32X35 yields 402.1 N push at 0.5 MPa, whereas stepping up to an ACQ50X35 provides 981.8 N push at 0.5 MPa, giving you a clear mechanical advantage scale for your 35 mm stroke requirement. To finalize your order, confirm the 40 mm bore, 35 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the absence of a sensor magnet. Keep in mind that a standard ACQ body will not hold a suspended load if air pressure drops or the directional valve is centered; the rod will drift, and the fixed NBR bumper only cushions the end of travel. For fail-safe positioning, an external rod lock or a pilot-operated check valve is required.
Quick checklist
This 40 mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa with a speed range of 30-500 mm/s.
No, the ACQ40X35T uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable air cushion, so for high-speed or high-mass loads, you should add an external shock absorber or slow the approach velocity.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.