
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X40BCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X40BCBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, delivering a robust 628.3 N push and 527.8 N pull at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial footprint compared to standard round-body options, while the hard-anodized aluminum bore ensures extended operational life.
This specific configuration includes a male M14x1.5 piston rod end for direct mechanical coupling and a CB mounting bracket for pivot applications. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, and the body features integrated magnetic-switch grooves ready for sensor accessories. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X40BCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives pivot arms on logistics sorting lines where the 628.3 N extend force easily redirects moderate-weight cartons without demanding excessive axial mounting depth.
Mounts via the CB bracket to swing robotic gripper arms into moulding machines, utilizing the male M14x1.5 rod end for secure tooling attachment during part ejection.
Executes rapid 40 mm strokes to fold corrugated cardboard flaps on continuous packaging equipment, relying on the fixed NBR bumper to absorb the repetitive end-stop shock.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm version if your load requires only 402.1 N of push force at 0.5 MPa, or stepping up to the 50 mm bore if you need a higher 981.8 N output. Keep in mind that a standard double-acting cylinder like this does not inherently hold its position if air pressure drops or the valve is centered; the piston will drift, so an external rod lock or pilot-operated check valve is necessary for fail-safe load holding.
For ordering, verify this exact specification: 40 mm bore, 40 mm stroke, NPT1/8 port, male M14x1.5 rod thread (B option), CB mounting bracket, and no internal sensor magnet. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force increases to 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not an adjustable air cushion; for high-energy cycles, you should add an external shock absorber. Additionally, it does not hold its load if air is lost, so an external rod lock is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.