
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X40BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X40BT is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduces overall axial length compared to conventional round-body cylinders, conserving valuable machine footprint depth.
This specific configuration features a male-thread M14x1.5 piston rod end for direct mechanical coupling to your load. The 16 mm rod operates within a hard-anodized bore, while fixed NBR elastomer bumpers absorb end-stop impact. Note that this variant ships without a sensor magnet, though the body retains magnetic-switch grooves for future retrofitting. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X40BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force at 0.5 MPa to securely hold aluminum workpieces against a CNC machining table via the male M14x1.5 rod thread.
Actuates a routing gate on a logistics sorting line, utilizing the short 40 mm stroke and compact body to fit within tight conveyor side-frame clearances.
Drives a sealing head down onto corrugated boxes, relying on the fixed NBR bumper to absorb the mechanical shock of rapid 30-500 mm/s cycling.
When sizing your pneumatics, compare this 40 mm bore offering 628.3 N push @0.5 MPa against the smaller 32 mm bore (402.1 N push) or the larger 50 mm bore (981.8 N push) to ensure optimal force matching. To confirm your ordering essentials: specify 40 mm bore, 40 mm stroke, NPT1/8 port, no magnet, and the male M14x1.5 rod thread.
Remember that a standard ACQ body will not hold a load if air pressure drops or the valve is centred; the piston drifts and the fixed NBR bumper only decelerates it near the stroke end. For fail-safe vertical load holding, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 40 mm bore double-acting cylinder generates 628.3 N push and 527.8 N pull at 0.5 MPa. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not field-adjustable. If your application involves high kinetic energy or fast cycle speeds, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.