
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X40CBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X40CBT is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to round-body alternatives, making it highly effective for machinery where space is strictly limited. The unit operates at speeds between 30 and 500 mm/s.
This specific configuration includes a CB mounting bracket for secure attachment and uses a default female-thread piston rod end (M8x1.25) on its 16 mm rod. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable cushion, ensuring consistent end-stop absorption. While the body features magnetic-switch grooves, this particular unit ships without a piston magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X40CBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force at 0.5 MPa to secure mid-weight aluminum castings onto a CNC machining center, utilizing the CB bracket for rigid base mounting.
Actuates a routing flap on a logistics sorting line, where the short 40 mm stroke and compact body depth prevent interference with passing totes.
Drives a sealing head down onto corrugated cartons, relying on the fixed NBR bumper to soften the impact at the end of each cycle.
When sizing your actuator, consider stepping down to the 32 mm bore (402.1 N push @0.5 MPa) for lighter duties, or moving up to the 50 mm bore (981.8 N push @0.5 MPa) if your load requires greater extension force. Remember that a standard double-acting cylinder like this does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required. To order, confirm the 40 mm bore, 40 mm stroke, NPT1/8 port, female rod thread, and the CB bracket.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force is 879.6 N, and the maximum push force is 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. It uses a fixed NBR elastomer bumper at each end to absorb end-stop impact; it is not an adjustable air cushion. Additionally, it does not feature a position lock, so the rod will drift if air is lost. For high-speed applications, slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.