
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X40SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X40SBT is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces overall axial length compared to traditional round-body units, saving valuable mounting depth in tight machinery layouts. The bore features a hard-anodized inner wall and a two-way piston seal for reliable longevity.
This specific configuration includes a built-in piston magnet (-S) for use with AirTAC reed or electronic switches fitted into the body grooves, enabling precise end-of-stroke detection. It also features a male-thread piston rod end (-B) sized at M14x1.5, providing a robust, direct coupling point for your tooling. Deceleration at the stroke extremes relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption or a slowed approach speed. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X40SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force at 0.5 MPa to securely grip aluminum castings inside a CNC machining center, utilizing the 40 mm stroke to clear the work envelope during part changes.
Uses the male M14x1.5 rod thread to mount a folding arm, driving corrugated cardboard flaps down at cycle speeds within the 30-500 mm/s range before the sealing head passes.
Actuates a routing gate on a packaging conveyor, where the compact C-clip body depth minimizes interference with passing pallets while offering 879.6 N of push force at 0.7 MPa.
When sizing your pneumatic drive, consider stepping down to the 32 mm bore if your application requires less force (402.1 N push at 0.5 MPa), or moving up to the 50 mm bore for heavier loads (981.8 N push at 0.5 MPa). The 40 mm bore strikes a middle ground for medium-duty handling. To finalize your order, confirm the 40 mm stroke, NPT1/8 port size, the required male M14x1.5 rod thread, and the inclusion of the sensor magnet.
Keep in mind that a standard ACQ body does not inherently hold its position or load if air pressure is lost or the control valve is centered; the rod will drift, and the fixed NBR bumper only absorbs impact energy near the end of travel rather than locking the piston. If your process demands fail-safe load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve into the system.
Quick checklist
The ACQ40X40SBT generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, 879.6 N of push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates on filtered air between 0.15 and 1.0 MPa, handles temperatures from -20 to +70 C, and runs at speeds of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion or a braking lock. For high-energy cycles, slow the approach or add an external shock absorber. Additionally, the piston will drift if air pressure is lost; for fail-safe load holding, an external rod lock or pilot-operated check valve is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.