
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X40ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X40ST is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to traditional round-body units, saving valuable mounting depth in tight machinery footprints.
This 40 mm bore unit incorporates a built-in piston magnet for position sensing alongside a fixed NBR elastomer bumper at each end stop. The bumper decelerates the stroke but is not a field-adjustable air cushion or a locking brake, so high energy cycles may require external shock absorption. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X40ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force at 0.5 MPa to secure aluminum workholding pallets onto a machining center sub-plate before a cutting cycle begins.
Actuates a routing flap on a high-speed logistics conveyor to sort medium-weight parcels into secondary packing lanes using its 40 mm stroke.
Drives the upper sealing head down onto filled cardboard cartons, utilizing the fixed NBR bumper to soften the end-of-stroke impact during repetitive packaging runs.
When sizing this 40 mm bore model, consider stepping down to the 32 mm bore for lighter duties, which yields 402.1 N of push at 0.5 MPa, or stepping up to the 50 mm bore to gain 981.8 N of thrust. Keep in mind that a standard ACQ body will not hold a suspended load if air pressure drops or the directional valve centers; the rod drifts and the fixed bumper only slows travel near the end of the stroke. For fail-safe vertical holding, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 40 mm bore, 40 mm stroke, NPT1/8 port, built-in S magnet, and the default female M8x1.25 rod thread.
Quick checklist
At 0.5 MPa, this 40 mm bore double-acting cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force is 879.6 N, and the maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb shock, which cannot be field-adjusted like a pneumatic cushion. Additionally, it does not feature a locking mechanism; if air is lost or the valve is centered, the rod will drift, so an external rod lock is needed for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.