
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X45BCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X45BCBT is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod body design drastically reduces axial mounting depth compared to traditional round-body units, making it highly effective for machinery where space is strictly limited.
This specific configuration features a male-thread M14x1.5 piston rod end for direct, secure coupling to your load, alongside a CB mounting bracket for rigid attachment. The bore is hard-anodized for longevity, and while this model ships without a sensor magnet, the body retains full magnetic-switch grooves for future retrofitting. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X45BCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N push stroke to fold and secure heavy cardboard flaps on high-speed packaging lines, utilizing the male M14x1.5 thread for a rigid mechanical linkage.
Actuates routing gates on conveyor networks to redirect heavy pallets, taking advantage of the CB bracket to mount rigidly against lateral vibration.
Drives small bushings or bearings into motor housings on an assembly line, where the fixed NBR bumper safely absorbs the 45mm end-stop impact without requiring external adjustments.
When sizing your application, consider stepping down to the Ø32 bore (402.1 N push @0.5 MPa) for lighter duties, or moving up to the Ø50 bore (981.8 N push @0.5 MPa) if you need greater thrust. Keep in mind that a standard ACQ body does not hold its position or load if air pressure drops or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates the piston near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 40mm bore, 45mm stroke, NPT1/8 port, male-thread (B) M14x1.5 rod end, CB mounting bracket, and the absence of a sensor magnet.
Quick checklist
This 40mm bore cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ40X45BCBT uses a fixed NBR elastomer bumper at each end to absorb shock, which is not field-adjustable. For high-speed or high-energy cycles, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.