
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X45BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X45BT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics, delivering a robust 628.3 N push and 527.8 N pull at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduces axial footprint compared to traditional round-body units. This 40 mm bore model features a 16 mm piston rod and utilizes a NPT1/8 port.
Equipped with a male M14x1.5 rod-end thread, this variant couples directly to your mechanism with precision. The bore interior is hard-anodized for longevity, and the end stops rely on fixed NBR elastomer bumpers rather than adjustable cushions. While it lacks a built-in sensor magnet, the body retains peripheral grooves for adding AirTAC reed or electronic switches if you later specify an -S model. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X45BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum engine blocks during CNC machining, utilizing the 628.3 N extend force to lock parts firmly against locators without occupying excessive fixture depth.
Drives mechanical arms to tuck corrugated carton flaps at high speed, where the fixed NBR bumper absorbs the end-stop impact within the 30-500 mm/s operating range.
Actuates a routing gate on a beverage filling line, using the male M14x1.5 thread to attach a deflector plate that pushes glass bottles into a labeling lane.
When sizing this 40 mm bore, consider stepping down to the 32 mm bore for 402.1 N push at 0.5 MPa, or moving up to the 50 mm bore for 981.8 N push at 0.5 MPa. This ACQ40X45BT configuration includes the crucial ordering details: 40 mm bore, 45 mm stroke, NPT1/8 port, no magnet, and a male M14x1.5 rod thread.
Note that a standard double-acting cylinder drifts when air pressure is lost or the directional valve is centered; the fixed NBR bumper only decelerates the piston near stroke end and does not function as a locking brake. If your application requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This 40 mm bore cylinder generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles a proof pressure of 1.5 MPa, and functions at speeds from 30-500 mm/s across a -20 to +70 C temperature range.
No, the ACQ40X45BT uses fixed NBR elastomer bumpers at both ends to absorb end-stop energy, which cannot be field-adjusted. For high kinetic energy loads, you should either slow the approach speed or mount an external shock absorber to prevent premature wear.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.