
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X45CBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X45CBT is a double-acting, single-rod JIS compact cylinder engineered for space-constrained machinery. Utilizing a riveted piston-to-rod joint and a C-clip retained body, this 40 mm bore unit minimizes axial footprint while delivering 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. It is designed for 45 mm of travel and features a NPT1/8 port.
This configuration includes a CB clevis bracket mount and a standard female M8x1.25 rod-end thread. The internal bore is hard-anodized for longevity, and end-of-travel impacts are absorbed by fixed NBR elastomer bumpers rather than adjustable air cushions. The body retains magnetic-switch grooves, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X45CBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a routing flap on a packaging conveyor, using the 45 mm stroke to redirect cartons into secondary lanes with 628.3 N of extend force.
Ejects small stamped metal parts from a progressive die bed, where the short C-clip body depth conserves valuable vertical machine space.
Pushes bearings into housings on an assembly line, relying on the CB clevis mount to accommodate slight angular misalignment during the stroke.
When sizing this 40 mm bore actuator, compare its 628.3 N push force at 0.5 MPa against adjacent options. Stepping down to a 32 mm bore yields 402.1 N, while stepping up to a 50 mm bore provides 981.8 N. For this CB-mounted model, verify your clevis pin dimensions and confirm the 45 mm stroke fits your mechanism. The default female M8x1.25 rod thread couples directly to standard attachments, but side loading must be minimized on this compact body.
If your process requires fail-safe position holding upon loss of air pressure, note that a standard ACQ cylinder will drift. The fixed NBR bumper only decelerates the piston near the stroke ends rather than locking it. You must integrate an external rod lock or a pilot-operated check valve to secure the load safely.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder generates 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force reaches 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at each end to absorb end-stop impact, which are not field-adjustable. For high-energy cycles, slow the approach speed or add external shock absorbers. Additionally, while the body has sensor grooves, this specific SKU ships without the internal magnet, so reed or electronic switches will not function without modifying the piston.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.