
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X45SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X45SBT is a double-acting, single-rod JIS compact cylinder engineered to deliver a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to standard round-body units, making it highly effective for machinery where space is strictly limited. The bore accepts a NPT1/8 port and operates at speeds between 30-500 mm/s.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B) sized at M14x1.5 for direct mechanical coupling. Instead of an adjustable air cushion, the cylinder relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. If your cycle demands higher kinetic energy absorption, adding an external shock absorber or slowing the approach speed is advised. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X45SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing gates on medium-duty parcel conveyors, utilizing the 628.3 N extend force to push boxed goods smoothly into sorting lanes.
Ejects plastic parts from injection moulding machines, where the short 45 mm stroke and male M14x1.5 rod thread securely extract components from tight tooling spaces.
Drives the sealing head down onto filled cartons, relying on the NBR bumper to soften the end-stop impact during continuous high-speed packaging runs.
When sizing this 40 mm bore model, consider stepping down to the 32 mm bore for lighter loads, which provides a 402.1 N push at 0.5 MPa, or stepping up to the 50 mm bore for heavier tasks, offering 981.8 N push at 0.5 MPa. This ACQ40X45SBT configuration ships with a male M14x1.5 rod thread, a NPT1/8 port, and the integrated magnet for switch mounting. Note that a standard compact cylinder will drift and lose its position if air pressure drops or the valve is centered; the fixed bumper only decelerates the piston near the stroke end and does not function as a locking brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The ACQ40X45SBT generates a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa, and a push force of 879.6 N at 0.7 MPa. The maximum push force is 128 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
The -S code indicates a built-in piston magnet, allowing you to mount AirTAC reed or electronic solid-state switches directly into the body grooves for precise position detection. The -B code specifies a male-thread piston rod end (M14x1.5), enabling a direct and secure threaded connection to your tooling or load without requiring a separate coupling nut.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.