
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X45ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X45ST is a double-acting JIS compact air cylinder engineered with a short C-clip and riveted body structure. This design significantly reduces axial mounting depth compared to round-body units, providing a highly space-efficient footprint for machine builders. Delivering 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, it is tailored for mid-range actuation tasks.
This 40 mm bore variant incorporates a built-in piston magnet (indicated by the S option) compatible with AirTAC reed or electronic switches, which seat directly into the grooves around the hard-anodized aluminum body. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption to prevent end-stop wear. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X45ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the short 45 mm stroke mechanism to fold and seal package flaps on a high-speed carton erector, utilizing the 628.3 N push force to crease heavy corrugated board reliably.
Actuates a pneumatic routing gate on a beverage bottling conveyor, using the integrated magnet to confirm gate position and the compact body to fit within tight transfer frame clearances.
Secures material in a bar feeder chuck prior to machining, where the fixed NBR bumper absorbs the stop impact without requiring bulky adjustable cushioning hardware.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm bore (402.1 N push @0.5 MPa) for lighter duties, or moving up to the 50 mm bore (981.8 N push @0.5 MPa) if your application demands greater thrust. Keep in mind that a standard ACQ body does not inherently hold its load if air pressure drops or the valve centers; the piston will drift, and the fixed bumper only decelerates it near the end of travel. For fail-safe position holding, an external rod lock or a pilot-operated check valve is required.
To order this specific unit correctly, confirm the 40 mm bore, 45 mm stroke, NPT1/8 port size, the built-in magnet (S), and the default female-thread piston rod end (M8x1.25). If your coupling needs a male thread, specify the B option for an M14x1.5 rod end.
Quick checklist
This 40 mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, the ACQ40X45ST uses a fixed NBR elastomer bumper at each end to absorb the end-stop impact. It is not a field-adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber to prevent premature wear.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.