
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X45T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X45T is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly significantly reduces overall axial length compared to standard round-body units, making it highly effective for machinery where mounting depth is restricted. The unit operates at speeds between 30 and 500 mm/s.
This specific configuration features a 40 mm bore, a 45 mm stroke, and a NPT1/8 port. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, meaning high-energy cycles may require external shock absorption. The piston rod measures 16 mm with a default female M8x1.25 end thread, and while the body retains magnetic-switch grooves, this particular model ships without a sensing magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X45T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force to secure aluminum housings inside CNC machining centers, utilizing the short body length to fit within tight multi-axis tombstone setups.
Drives the mechanical arms that tuck and fold corrugated cardboard flaps on high-speed packaging lines, relying on the 45 mm stroke and fixed NBR bumpers to absorb end-of-travel impacts.
Actuates a routing gate on a logistics conveyor belt, using its 527.8 N retract force to swing the arm and sort parcels into secondary chutes without occupying excessive frame width.
Selecting this 40 mm bore involves balancing your force requirements against spatial limits. If you need less force, stepping down to the 32 mm bore yields 402.1 N of push at 0.5 MPa, while moving up to the 50 mm bore provides 981.8 N. Remember that a basic double-acting cylinder like this drifts when air pressure is lost or the valve is centered, as the fixed bumpers only decelerate the piston near stroke end rather than locking it; for fail-safe load holding, an external rod lock or pilot-operated check valve is necessary. When ordering, confirm the 40 mm bore, 45 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the absence of a magnet.
Quick checklist
This 40 mm bore double-acting cylinder generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at each end to absorb the stop impact, which is not an adjustable air cushion, so high-speed applications may need external shock absorbers. Additionally, it does not hold its position if air is lost; the rod will drift, requiring an external rod lock or pilot-operated check valve for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.