
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X50BCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X50BCBT is a double-acting JIS compact cylinder engineered for tight axial spaces. Its short C-clip and riveted body design significantly reduces mounting depth compared to round-body alternatives. Operating at 0.5 MPa, it generates 628.3 N of push force and 527.8 N of pull force, with a 16 mm piston rod handling the dynamics.
This specific configuration includes a male M14x1.5 rod thread for direct load coupling and a CB mounting bracket for the interface. The body features integrated sensor grooves for positioning switches, though this unit ships without the internal magnet. Deceleration is handled by fixed NBR elastomer bumpers at both ends, which are not adjustable, so high energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X50BCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Pushes packages on a sorting line with 628.3 N of force at 0.5 MPa, utilizing the male M14x1.5 thread for a rigid diverter arm connection.
Secures aluminum workpieces during machining, where the 527.8 N pull force retracts the clamp clear of the cutting tool path.
Acts as a pneumatic stop for incoming pallets, absorbing the end impact via the fixed NBR bumper when integrated with a CB bracket.
When sizing this 40 mm bore, you can step down to the 32 mm bore for 402.1 N push at 0.5 MPa, or step up to the 50 mm bore for 981.8 N push at 0.5 MPa. Keep in mind that a plain ACQ cylinder will not hold a load if air pressure is lost or the valve is centered; the rod drifts, and the fixed bumper only decelerates it near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 40 mm bore, 50 mm stroke, NPT1/8 port, male M14x1.5 rod thread, CB bracket, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, the ACQ40X50BCBT uses fixed NBR elastomer bumpers at each end, which are not adjustable air cushions. Additionally, it does not hold its load if air is lost; you must use an external rod lock or pilot-operated check valve for fail-safe position holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.