
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X50BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X50BT is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to standard round-body units, saving valuable machine footprint space. The bore is hard-anodized for extended wear life.
This specific configuration includes a male M14x1.5 thread on the Ø16 mm piston rod for direct, secure load coupling. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. The body retains sensor grooves, though this unit ships without the magnetic piston. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X50BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of clamping thrust to secure aluminum housings inside CNC machining centers, utilizing the male M14x1.5 thread for rigid tooling attachment.
Drives the flap-folding mechanism on continuous motion packaging lines, where the short body depth prevents interference with tight conveyor clearances.
Ejects stamped metal parts from progressive dies, relying on the fixed NBR bumper to absorb the repetitive end-of-stroke impact at operating speeds up to 500 mm/s.
When sizing your pneumatic drive, consider stepping down to the Ø32 bore (402.1 N push @0.5 MPa) for lighter duties, or moving up to the Ø50 bore (981.8 N push @0.5 MPa) for heavier thrust requirements. To order this exact unit, confirm the 40 mm bore, 50 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the absence of a sensor magnet.
Remember that a standard compact cylinder like this ACQ40X50BT will not hold its position if air pressure drops or the valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve must be integrated into your circuit.
Quick checklist
This 40 mm bore cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It features a Ø16 mm rod with a male M14x1.5 thread, a NPT1/8 port, and a 50 mm stroke.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not field-adjustable. Additionally, it does not hold its load on air loss; the rod drifts, so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.