
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X50CBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X50CBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to minimize axial mounting depth. It supplies 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it a robust choice for mid-range actuation. The unit is configured with a CB mounting bracket and a 50 mm stroke.
This model features a 16 mm piston rod with an M8x1.25 female thread end. Deceleration is handled by fixed NBR elastomer bumpers at both ends, which are not adjustable, so high kinetic energy applications may need external shock absorption. The body includes sensor grooves, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X50CBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force at 0.5 MPa to secure aluminum workpieces in a CNC machining vise, utilizing the CB bracket for rigid machine mounting.
Actuates a 50 mm stroke routing flap on a packaging line conveyor, using the fixed NBR bumper to absorb the stop impact without requiring extra clearance.
Pushes stamped metal parts out of a press die area, where the short C-clip body saves valuable axial space within the tight machinery frame.
When sizing your pneumatic setup, stepping down to the 32 mm bore yields 402.1 N of push at 0.5 MPa, while stepping up to the 50 mm bore provides 981.8 N. This 40 mm bore offers a balanced middle ground for moderate load manipulation. To order, confirm the 40 mm bore, 50 mm stroke, NPT1/8 port, female rod thread, and the CB bracket requirement.
Keep in mind that a standard ACQ body does not hold position if air pressure drops or the valve centers; the rod will drift. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than an adjustable air cushion. It also does not function as a lock; if air is lost, the piston drifts. For high-speed impacts, add an external shock absorber, and use a separate rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.