
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X50ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X50ST is a double-acting, single-rod JIS compact cylinder engineered to deliver a 628.3 N push force at 0.5 MPa. Its C-clip and riveted piston-to-rod assembly drastically reduces the overall axial length compared to traditional round-body units, saving valuable mounting space within tight machine envelopes.
Equipped with a built-in piston magnet (-S), this 40 mm bore unit accepts AirTAC reed or electronic switches along its peripheral slots for precise end-of-stroke detection. The 16 mm piston rod features a standard female M8x1.25 thread, while impact energy at the stroke extremes is absorbed by fixed NBR elastomer bumpers rather than adjustable air cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X50ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing pop-up arms on packaging conveyors, utilizing the 628.3 N extend force to push cartons smoothly into secondary processing lanes.
Mounts on compact robotic arms to extract plastic parts from injection moulding machines, where the short C-clip body minimizes Z-axis interference.
Secures printed circuit boards during automated soldering or inspection, relying on the -S magnet and electronic switches to confirm clamp engagement.
Selecting this 40 mm bore involves sizing against adjacent options: dropping down to a 32 mm bore yields 402.1 N of push force, whereas stepping up to a 50 mm bore provides 981.8 N at 0.5 MPa. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the directional valve is centered; the rod will drift, and an external rod lock or pilot-operated check valve is required for fail-safe load holding.
When ordering, verify the 50 mm stroke, NPT1/8 port size, and the integrated magnet for switch sensing. The default rod end utilizes a female M8x1.25 thread, and the cylinder operates efficiently at speeds between 30 and 500 mm/s.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force reaches 879.6 N. The maximum push force is 128 kgf at the 1.0 MPa operating pressure limit.
No, the ACQ40X50ST uses fixed NBR elastomer bumpers at each end to absorb end-stop impact. It does not have field-adjustable air cushions, so for high-speed or high-energy cycles, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.