
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X50T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X50T is a double-acting, single-rod JIS compact cylinder engineered to save axial mounting depth. Its short C-clip and riveted piston-to-rod body construction yields a very small overall length compared to round-body alternatives, freeing up valuable space within tight machine footprints. This 40 mm bore model generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa.
This specific unit features a 50 mm stroke and utilizes a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable air cushion, so for high kinetic energy approaches you should slow the speed or add external shock absorption. The 16 mm piston rod uses a standard female M8x1.25 thread for direct load coupling, and the body includes magnetic-switch grooves for position sensing if a magnet is specified later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X50T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N push at 0.5 MPa required to snap corrugated cardboard carton blanks into shape on high-speed packaging lines.
Drives a 50 mm stroke routing gate to push heavy parcels off a main conveyor belt into secondary sorting lanes without occupying excessive frame depth.
Actuates the safety enclosure door on a turning center, utilizing the compact C-clip body length to fit within the tight machine guarding envelope.
When sizing your pneumatic drive, compare this 40 mm bore offering against its neighbors. Stepping down to the 32 mm bore yields 402.1 N of push at 0.5 MPa, while stepping up to the 50 mm bore provides 981.8 N, allowing you to match exact dynamic requirements. A plain ACQ body does not hold its load if air pressure drops or the valve is centered—the piston will drift, and the NBR bumper only decelerates near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
To order this exact configuration, confirm the 40 mm bore, 50 mm stroke, NPT1/8 port, and the default female-thread piston rod (M8x1.25). This particular SKU ships without a sensor magnet, though the body retains the grooves for adding reed or electronic switches later.
Quick checklist
The 40 mm bore double-acting single rod provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which cannot be field-adjusted. It also does not function as a brake; if air is lost or the valve is centered, the rod drifts until it hits the bumper. Use an external shock absorber for high energy loads, and a pilot-operated check valve for position holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.