
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X5BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 5mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X5BT is a double-acting JIS compact cylinder engineered for tight axial spaces, delivering 628.3 N of push force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces overall length compared to round-body alternatives, fitting neatly into shallow machine footprints.
This specific configuration features a male-thread M14x1.5 piston rod end for direct load coupling. The bore interior is hard-anodized for longevity, and while this unit ships without a sensor magnet, the body retains grooves for AirTAC reed or electronic switches. End-stopping relies on a fixed NBR elastomer bumper, not an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X5BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a short 5 mm knockout stroke to eject plastic parts from injection molds without requiring deep header clearance.
Uses the 628.3 N extend force to secure aluminum workpieces against a machining fixture before a milling operation.
Executes rapid 5 mm flap-folding motions on continuous motion packaging lines, utilizing the compact body to fit between conveyor belts.
When sizing this 40 mm bore, stepping down to a 32 mm bore yields 402.1 N push at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N push at 0.5 MPa. This 5 mm stroke variant is ideal for micro-movements, though the bore supports standard strokes up to 100 mm.
To confirm your ordering essentials: specify the 40 mm bore, 5 mm stroke, NPT1/8 port, and the male-thread (B) rod end. Note that a plain ACQ does not hold its load if air pressure drops or the valve is centred; the piston will drift and the fixed bumper only decelerates it near the stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the stop energy; it is not an adjustable air cushion, so for high-speed applications you should slow the approach or add an external shock absorber. The rod end features a male M14x1.5 thread for direct coupling to your load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.