
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X5SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 5mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X5SBT is a double-acting JIS compact cylinder engineered for minimal axial footprint machines. It yields 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. The integrated C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body alternatives, fitting neatly into tight machine envelopes.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread M14x1.5 rod end (-B) for direct load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end. Because it lacks an adjustable air cushion, high velocity applications should incorporate an external shock absorber to soften the end-stop impact. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X5SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides rapid 5mm knockout strokes to eject plastic parts from injection molding tools where axial depth is strictly limited.
Drives short-stroke sealing jaws on continuous motion packaging equipment, utilizing the 628.3 N thrust to fold and press flaps.
Secures aluminum extrusions in machining cells via the male M14x1.5 threaded rod, offering rigid clamping in a compact footprint.
When sizing this 40mm bore actuator, consider stepping down to the 32mm bore (402.1 N push at 0.5 MPa) for lighter duties, or moving up to the 50mm bore (981.8 N push at 0.5 MPa) if your load requires greater thrust. The ACQ40X5SBT is specified with a 5mm stroke, NPT1/8 porting, a male M14x1.5 rod thread, and a magnetic piston.
Note that a standard compact cylinder will not maintain its position if air pressure drops or the directional valve is centered; the rod will drift. To safely hold a load without live pressure, an external rod lock or a pilot-operated check valve must be installed.
Quick checklist
This 40mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at the stroke ends rather than adjustable air cushions, so external shock absorbers may be needed for high energy loads. The included magnet (-S) works with AirTAC reed or electronic switches fitted into the body grooves for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.