
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X5ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 5mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X5ST is a double-acting JIS compact cylinder engineered for very short linear movements, providing a robust 628.3 N push force at 0.5 MPa. Its integrated C-clip and riveted piston-to-rod architecture drastically reduce overall axial length compared to conventional round-body units, saving valuable mounting depth inside tight machine envelopes.
This specific configuration includes a built-in piston magnet (-S) for non-contact position sensing via AirTAC reed or electronic solid-state switches seated in the body grooves. Deceleration at the 5mm travel limits is handled by a fixed NBR elastomer bumper, which is not a field-adjustable air cushion, ensuring a firm mechanical stop rather than a locking mechanism. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X5ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a short 5mm stroke to seat dowel pins into machined aluminum housings on an automated CNC milling line, utilizing the 628.3 N push force for reliable insertion.
Executes rapid, short-throw folding motions on corrugated packaging cartons prior to top-sealing, where the compact C-clip body minimizes frame interference.
Secures mild steel plates against a welding fixture using the 527.8 N retract pull force, with the -S magnet triggering a solid-state switch to confirm clamp engagement.
When sizing this 40mm bore, note the adjacent options: stepping down to a 32mm bore yields 402.1 N push at 0.5 MPa, while stepping up to a 50mm bore provides 981.8 N push at 0.5 MPa. Keep in mind that a standard ACQ body will drift and lose its held position if air pressure drops or the directional valve is centered, so an external rod lock or pilot-operated check valve is mandatory for fail-safe load holding.
To finalize your build, verify this model's 40mm bore, 5mm stroke, NPT1/8 port, female M8x1.25 rod-end thread, and the required -S magnet for sensor integration.
Quick checklist
This 40mm bore double-acting cylinder generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa pressure, 30-500 mm/s speed, and -20 to +70 C temperatures.
It relies on a fixed NBR elastomer bumper at each end to absorb the mechanical stop, which is not an adjustable air cushion. The included -S magnet allows you to mount AirTAC reed or electronic switches along the body grooves for end-position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.