
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X5T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 5mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X5T is a double-acting JIS compact air cylinder engineered for minimal axial footprint applications. Utilizing a riveted piston-to-rod connection and C-clip body assembly, it provides 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. The 40 mm bore features a hard-anodized inner wall and a 16 mm piston rod.
This specific configuration ships with a female M8x1.25 rod-end thread and a NPT1/8 port. Deceleration at the stroke ends relies on fixed NBR elastomer bumpers rather than an adjustable air cushion, making it highly durable for repetitive short-travel motions. The body includes grooves for magnetic switches, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X5T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Applies 628.3 N of hold-down force on aluminum workpieces inside a machining center, utilizing the 5 mm stroke to lock parts rapidly without consuming valuable tooling envelope.
Performs short-travel tucking and sealing flap operations on continuous packaging lines, where the fixed NBR bumper withstands high-frequency repetitive impacts.
Presses small bearings or pins into housings on an automated assembly press, benefiting from the rigid C-clip compact body that resists deflection during brief power strokes.
When sizing this 5 mm stroke actuator, verify if the 628.3 N push at 0.5 MPa meets your clamping requirement. Stepping down to the 32 mm bore yields 402.1 N push, while stepping up to the 50 mm bore provides 981.8 N push. Keep in mind that a standard ACQ body does not maintain its position if air pressure drops or the valve is centered; the rod drifts, and the fixed bumper only softens the end stop. For fail-safe load holding, specify an external rod lock or a pilot-operated check valve.
To order, confirm the essentials: 40 mm bore, 5 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. This model uses fixed NBR elastomer bumpers at each end, which are not field-adjustable; for high energy impacts, slow the approach or add an external shock absorber. Additionally, while the body has sensor grooves, this specific unit ships without a magnet, so it cannot host a reed or electronic switch without modification.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.