
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X60BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X60BT is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduce axial length compared to round-body alternatives, saving valuable machine footprint depth. The unit features a male-thread piston rod end (M14x1.5) that couples directly to your load, alongside a NPT1/8 port.
This model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. The hard-anodized aluminum bore ensures low friction and long service life. Although this specific unit ships without a magnet, the body retains external magnetic-switch grooves for future sensing upgrades. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X60BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the mechanical arms on a carton erector to fold minor flaps before tape sealing, utilizing the 60 mm stroke and 628.3 N push force to ensure crisp cardboard creases.
Shifts a sliding safety door on a CNC turning center, where the short C-clip body minimizes axial depth behind the machine guard and the male M14x1.5 rod secures the linkage.
Raises and lowers a liquid filler nozzle block on a rotary bottling line, using the fixed NBR bumper to soften the 60 mm upward stop without needing external adjustments.
When sizing this 40 mm bore, consider stepping down to the 32 mm bore (402.1 N push at 0.5 MPa) for lighter duties, or up to the 50 mm bore (981.8 N push at 0.5 MPa) if you need greater thrust. Remember that a plain ACQ body does not hold its position or load when air is lost or the valve is centered; the rod drifts and the fixed NBR bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To order this configuration correctly, confirm the 40 mm bore, 60 mm stroke, NPT1/8 port, the male M14x1.5 rod thread (B option), and that no sensor magnet is installed.
Quick checklist
At 0.5 MPa, this 40 mm bore double-acting cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No. The ACQ40X60BT uses a fixed NBR elastomer bumper at each end, not a field-adjustable air cushion. For high-speed applications, you should slow the approach or add an external shock absorber. Additionally, it does not hold a load if air pressure drops; the rod drifts and requires an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.