
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X60SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X60SBT is a double-acting JIS compact air cylinder engineered with a 40 mm bore and 60 mm stroke. It generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it well-suited for medium-duty positioning tasks. The short C-clip and riveted body design drastically reduces axial mounting depth compared to standard round-body units, saving valuable machine footprint space.
This specific configuration includes a built-in piston magnet (S) for position sensing and a male-thread rod end (B). The M14x1.5 male thread couples directly to your tooling, while the integrated magnet works seamlessly with AirTAC reed or electronic switches fitted into the body grooves. Deceleration is handled by fixed NBR elastomer bumpers at each end, which are not adjustable, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X60SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates the pusher carriage to advance raw bar material into the collet, utilizing the 60 mm stroke and male M14x1.5 thread for a solid tooling coupling.
Deploys the mechanical folding arm to tuck top flaps of corrugated boxes prior to tape application, relying on 628.3 N of extend force to overcome cardboard resistance.
Drives the routing gate on a modular transport line to redirect heavy pallets, taking advantage of the short body depth to fit within tight conveyor frame gaps.
When sizing this 40 mm bore, stepping down to a 32 mm bore yields 402.1 N push at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N push. The ACQ40X60SBT operates at 30-500 mm/s, uses a NPT1/8 port, and includes the S magnet and B male rod options. Remember that a plain compact cylinder does not hold its position if air pressure drops or the valve centers; the rod will drift, and an external rod lock or pilot-operated check valve is required for fail-safe load holding.
Quick checklist
The 40 mm bore provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The port size is NPT1/8, and the operating speed range is 30-500 mm/s.
No, the ACQ40X60SBT uses fixed NBR elastomer bumpers at each end to absorb end-stop impact, not an adjustable air cushion. For high-speed or high-energy loads, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.