verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST

The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X60ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ40 mm
  • Stroke60 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM8×1.25 (F) / M14×1.5 (B)
  • ConfigurationStandard compact
$55.60 $63.10Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ40 stroke, mounting and version on one page All ACQ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST

The AirTAC ACQ40X60ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics, delivering a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to traditional round-body units. This 40 mm bore model features a 60 mm stroke and includes a built-in piston magnet for position sensing.

The bore interior is hard-anodized for longevity, while the piston relies on a two-way seal. End-stop energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed cycles may require external shock absorption. The integrated -S magnet interfaces directly with AirTAC reed or electronic switches housed in the body grooves, and the default female M8x1.25 rod end threads into a NPT1/8 port system. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ40X60ST
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ40 mm
Stroke60 mm
Acting typeDouble acting
Port sizePT1/8
Rod end threadM8×1.25 female / M14×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST

ACQJIS compact (thin) double-acting cylinder series.
40Bore size in mm.
×60Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST Is Used

conveyor_belt

Package Diverting

Actuates routing gates on high-speed packaging lines, utilizing the 628.3 N extend force to push cartons onto secondary chutes without requiring deep axial mounting space.

precision_manufacturing

PCB Edge Clamping

Secures circuit boards during drilling or routing operations, using the integrated magnet to confirm clamp engagement via an electronic switch before the spindle starts.

factory

Pallet Stopper Arms

Functions as a pneumatic stop in pallet handling conveyors, where the fixed NBR bumper absorbs the repeated end-stop impact of the 60 mm stroke motion.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST the Right Cylinder?

When sizing this 40 mm bore model, consider stepping down to the 32 mm bore for lighter loads, which provides 402.1 N of push force at 0.5 MPa, or stepping up to the 50 mm bore for heavier demands, offering 981.8 N. The ACQ40X60ST configuration specifies a 40 mm bore, 60 mm stroke, NPT1/8 porting, a female M8x1.25 rod thread, and the -S magnet option for switch readiness.

Keep in mind that a standard double-acting cylinder of this type does not inherently hold its load if air pressure is lost or the valve is centered; the piston will drift. If your application requires a fail-safe position hold under pressure loss, you must incorporate an external rod lock or a pilot-operated check valve into the pneumatic circuit.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST FAQ

The 40 mm bore generates a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at the 1.0 MPa operating pressure limit.

Cushioning is provided by a fixed NBR elastomer bumper at each end and cannot be field-adjusted; for high kinetic energy loads, add an external shock absorber. The -S option denotes a built-in piston magnet that allows AirTAC reed or electronic switches to detect position when mounted in the body grooves.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ40X60ST

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ40X60ST and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.