
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X70BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 70mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X70BT is a double-acting, single-rod JIS compact cylinder engineered for space-constrained machinery. By utilizing a C-clip and riveted piston-to-rod joint, the overall axial footprint is drastically reduced compared to standard round-body units. At 40 mm bore, it generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it well-suited for moderate-duty industrial positioning.
This specific configuration includes a male M14x1.5 threaded piston rod end for direct, secure load coupling. The body features integrated magnetic-switch grooves, though this particular SKU ships without the internal magnet. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than an adjustable air cushion, requiring operators to manage approach speeds in high-inertia setups. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X70BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a routing flap on a logistics sorting line, using the 70 mm stroke to redirect parcels efficiently into secondary chutes.
Pushes finished plastic parts out of a small injection moulding cavity, where the short body length minimizes machine interference.
Drives a mechanical arm to fold corrugated cardboard flaps prior to sealing, relying on the 628.3 N push force to overcome material resistance.
Selecting this 40 mm bore model makes sense when your application requires roughly 628 N of extension force at 0.5 MPa. If you need less force, stepping down to the 32 mm bore yields 402.1 N of push, while stepping up to the 50 mm bore provides 981.8 N. Keep in mind that a standard double-acting cylinder like this will drift and lose its position if air pressure drops or the directional valve is centered; the fixed NBR bumper only decelerates the piston near stroke end and does not act as a locking brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
When ordering, confirm the 70 mm stroke, NPT1/8 port size, and the male M14x1.5 rod thread (indicated by the B suffix). Since this variant lacks the S option, it does not include a sensor magnet.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628.3 N of push (extend) force and 527.8 N of pull (retract) force. At 0.7 MPa, the push force increases to 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at both ends to absorb end-stop impact, which cannot be field adjusted like an air cushion. Additionally, while the body has grooves for magnetic switches, this specific model does not include the internal magnet, so reed or electronic switches will not function without modifying the cylinder.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.