
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X70CBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 70mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X70CBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to minimize axial depth where a round-body unit will not fit. It provides 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it suitable for medium-duty handling tasks.
This specific configuration includes a CB mounting bracket for rear hinge attachment and a 70 mm stroke within the 100 mm standard limit for this bore. The Ø16 mm piston rod uses a female M8x1.25 thread, and end-of-travel deceleration is handled by fixed NBR elastomer bumpers rather than adjustable air cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X70CBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a hinged flap deflector on a logistics sorting line, using the CB bracket to pivot the gate and handle 527.8 N retract force during package redirect.
Drives the upper sealing bar on an automated box taping machine, where the short body depth saves vertical space and the 70 mm stroke cleanly folds flaps.
Pushes molded plastic parts out of a press die, relying on the 628.3 N extend force to break the part free before a robotic gripper removes it.
When sizing your pneumatic drive, stepping down to a 32 mm bore yields 402.1 N of push at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N. This 40 mm model sits perfectly in the middle for 628.3 N applications. Keep in mind that a standard ACQ body does not hold a load if air pressure drops or the valve is centred; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 40 mm bore, 70 mm stroke, NPT1/8 port, default female rod thread (M8x1.25), the absence of a sensor magnet, and the CB rear hinge bracket.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. It uses fixed NBR elastomer bumpers at each end to absorb end stops, which are not field-adjustable, so you should slow the approach or add an external shock absorber for high-energy loads. Additionally, this specific model ships without a sensor magnet, though the body retains sensor grooves for AirTAC reed or electronic switches if a magnet is added later.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.