
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X70SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 70mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X70SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, significantly reducing axial mounting depth compared to traditional round-body units. It produces 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, utilizing a 16 mm piston rod.
This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches, and a male M14x1.5 thread (-B) for direct load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable, meaning high-speed applications may require an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X70SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on packaging carton erectors, using the 70 mm stroke and male M14x1.5 rod to push cardboard flaps into position prior to sealing.
Actuates the tool release arm on machining centers, where the 628.3 N extension force at 0.5 MPa securely pushes tool holders out of the spindle.
Controls the routing diverter gate on conveyor lines, relying on the integrated magnet to trigger electronic sensors for confirming gate position.
When sizing this 40 mm bore actuator, compare its 628.3 N push force at 0.5 MPa against the adjacent bores: stepping down to the 32 mm yields 402.1 N, while stepping up to the 50 mm provides 981.8 N. Note that a standard ACQ body does not hold its position if air pressure drops or the valve centers; the rod drifts, and the fixed NBR bumper only softens the end-of-stroke impact. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 40 mm bore, 70 mm stroke, NPT1/8 port, S magnet, and B male-thread rod end.
Quick checklist
This 40 mm bore cylinder generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ40X70SBT uses a fixed NBR elastomer bumper at each end to absorb the end stop. It is not an adjustable air cushion, so for high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.