verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST

The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X70ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 70mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ40 mm
  • Stroke70 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM8×1.25 (F) / M14×1.5 (B)
  • ConfigurationStandard compact
$59.23 $66.73Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ40 stroke, mounting and version on one page All ACQ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST

The AirTAC ACQ40X70ST is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduces axial mounting depth compared to conventional round-body units, making it highly effective for machinery where space is constrained. The hard-anodized aluminum bore ensures low friction and extended service life across its 70 mm travel.

This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches, which seat directly into the peripheral grooves around the cylinder body. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable pneumatic cushions, meaning high-speed operations may require external shock absorbers to mitigate impact energy. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ40X70ST
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ40 mm
Stroke70 mm
Acting typeDouble acting
Port sizePT1/8
Rod end threadM8×1.25 female / M14×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST

ACQJIS compact (thin) double-acting cylinder series.
40Bore size in mm.
×70Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST Is Used

conveyor_belt

Package Divert Gate

Actuates a routing flap on a high-speed logistics conveyor to redirect parcels into sorting chutes using its 628.3 N push force.

factory

Injection Mold Ejector

Drives a secondary ejection pin plate on a mid-size plastic injection molding machine, utilizing the 70 mm stroke to clear the tooling safely.

package_2

Carton Flap Folder

Folds the lower major flaps of corrugated shipping cartons on a continuous motion case sealer prior to adhesive application.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST the Right Cylinder?

When sizing this 40 mm bore unit, consider the adjacent standard bores to match your force requirements accurately. Stepping down to a 32 mm bore yields 402.1 N of push force at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N, allowing you to scale your actuator choice based on the exact load. The ACQ40X70ST operates at 30-500 mm/s and requires a NPT1/8 air port.

To finalize your order, confirm the 40 mm bore, 70 mm stroke, the integrated magnet for sensor tracking, and the default female M8x1.25 piston rod thread. Note that a standard ACQ body will drift and lose its position if air pressure drops or the directional valve is centered, as the NBR bumper only absorbs end-stop impact and does not function as a mechanical lock; applications requiring fail-safe load holding will need an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST FAQ

At 0.5 MPa, this 40 mm bore double-acting cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force reaches 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the functional speed range is 30-500 mm/s.

It uses fixed NBR elastomer bumpers at both ends to absorb end-stop shock, which are not field-adjustable like a pneumatic cushion. If air pressure is lost or the valve is centered, the cylinder cannot hold its position and the rod will drift; a fail-safe hold requires adding an external rod lock or a pilot-operated check valve.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ40X70ST

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ40X70ST and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.