
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X70T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 70mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X70T is a double-acting JIS compact cylinder featuring a 40 mm bore and a 70 mm stroke. It produces 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it well-suited for medium-duty handling. The short C-clip and riveted piston-to-rod design drastically reduce overall axial length compared to traditional round-body units, saving valuable machine footprint depth.
This model uses a 16 mm piston rod with a female M8x1.25 thread end and a NPT1/8 port. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed applications may need external shock absorption. The body includes grooves for magnetic switches, though this specific unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X70T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 628.3 N push to redirect heavy cardboard cartons on a high-speed logistics conveyor belt.
Uses the short 70 mm stroke to slide a machine tool safety enclosure, saving axial depth in a tight cell.
Applies downward clamping force on a stretch film roll carriage to maintain tension during pallet wrapping.
When sizing your pneumatic actuator, consider stepping down to the 32 mm bore (402.1 N push @0.5 MPa) for lighter loads, or up to the 50 mm bore (981.8 N push @0.5 MPa) if you need greater thrust. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered—the piston will drift, and the fixed NBR bumper only decelerates it near the end of travel, so a fail-safe hold requires an external rod lock or pilot-operated check valve.
To order this configuration correctly, confirm the 40 mm bore, 70 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and that no sensor magnet (-S) is required.
Quick checklist
At 0.5 MPa, the push (extend) force is 628.3 N and the pull (retract) force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa.
It uses a fixed NBR elastomer bumper at each end to absorb the shock. It is not an adjustable air cushion, so for high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.