
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X75BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X75BT is a double-acting JIS compact cylinder engineered for space-constrained machinery, utilizing a short C-clip and riveted piston-to-rod assembly to minimize axial depth. It generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, extending to 879.6 N push at 0.7 MPa. This 40mm bore variant features a 16mm piston rod and a NPT1/8 port.
This specific configuration includes the -B option, providing a male M14x1.5 thread on the rod end for direct mounting to tooling. The unit relies on a fixed NBR elastomer bumper at each stroke end to absorb impact rather than an adjustable air cushion, so high-energy cycles may require external shock absorption. While it lacks the -S magnet, the body retains magnetic-switch grooves for future sensing upgrades. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X75BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the sliding safety guard on a CNC turning center, utilizing the male M14x1.5 thread for a rigid tool coupling and the short JIS body to fit within the machine's tight column footprint.
Provides the 628.3 N push at 0.5 MPa needed to fold heavy corrugated cardboard flaps on a continuous flow wrapper, with the fixed NBR bumper absorbing the rapid end-of-stroke impact.
Powers a pusher arm on a packaging line conveyor to route wooden pallets, taking advantage of the 75mm stroke and 879.6 N thrust at 0.7 MPa for positive shifting.
When sizing this 40mm bore actuator, compare its 628.3 N push at 0.5 MPa against the adjacent options: step down to the 32mm bore for 402.1 N, or step up to the 50mm bore for 981.8 N if your payload requires greater thrust. Ensure your ordering essentials match this exact specification—a 40mm bore, 75mm stroke, NPT1/8 port, male M14x1.5 rod thread, and no sensor magnet.
Because this is a standard double-acting cylinder, it will not maintain its position if air pressure drops or the directional valve is centered; the rod will drift. If your application demands fail-safe load holding on power loss, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 40mm bore cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and runs at speeds of 30-500 mm/s.
No, the ACQ40X75BT uses fixed NBR elastomer bumpers at each end rather than an adjustable air cushion, so for high-speed cycles you should add an external shock absorber. Additionally, it will not hold a load if air is lost; the rod drifts, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.