
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X75SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X75SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to minimize axial footprint. It generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it a robust choice for mid-range pneumatic tasks.
This specific configuration includes a built-in piston magnet (-S) for position sensing alongside a male-thread piston rod end (-B) sized at M14x1.5 for direct mechanical coupling. The 40 mm bore utilizes a NPT1/8 port and relies on a fixed NBR elastomer bumper at each end stop to absorb impact energy rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X75SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a routing flap on a high-speed logistics conveyor, utilizing the 75 mm stroke and 628.3 N extend force to redirect parcels weighing up to 60 kg smoothly.
Deploys the male M14x1.5 threaded rod to push an ejector pin plate inside an injection molding machine, saving valuable axial depth in the tight tooling envelope.
Drives a mechanical folding arm on an automated packaging line to tuck corrugated box flaps, relying on the NBR bumper to soften the end-stop impact during rapid cycling.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm bore for lighter loads, which yields 402.1 N push at 0.5 MPa, or stepping up to the 50 mm bore for heavier tasks, providing 981.8 N push at 0.5 MPa. If your equipment loses air pressure or the directional valve centers, this cylinder cannot hold its load and the rod will drift, as the fixed bumper only decelerates the piston near the stroke ends rather than locking it.
To order correctly, confirm the 40 mm bore, 75 mm stroke, NPT1/8 porting, the required -S magnet for AirTAC reed or electronic switches, and the -B male M14x1.5 rod thread. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force increases to 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb shock, not an adjustable air cushion. Additionally, it does not feature a locking mechanism; if air is lost, the rod will drift, so an external rod lock or pilot-operated check valve is required for fail-safe position holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.