
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X75ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X75ST is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body cylinders, making it highly advantageous for machines where space is strictly limited.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches via the peripheral body grooves. The 40 mm bore uses a NPT1/8 port and a 16 mm piston rod with a default female M8x1.25 thread end. To absorb end-stop energy, it relies on fixed NBR elastomer bumpers rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X75ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a 75 mm stroke diverter arm on a package sorting conveyor, utilizing the 628.3 N push force at 0.5 MPa to reliably redirect medium-weight cardboard cartons.
Applies controlled clamping pressure to seal blister packaging materials, where the compact body depth minimizes the machine's overall footprint.
Ejects molded plastic parts from an injection molding fixture, using the integrated magnet to trigger an electronic switch for cycle counting.
When sizing this 40 mm bore model, consider stepping down to the 32 mm bore if your application only requires 402.1 N of push force at 0.5 MPa, or moving up to the 50 mm bore for a substantially higher 981.8 N push capacity. Because the fixed NBR bumper only decelerates the piston near stroke end and does not lock the rod, an external rod lock or pilot-operated check valve is required if the load must be held securely during air loss. To order, confirm the 40 mm bore, 75 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the -S magnet option.
Quick checklist
This 40 mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The operational speed range is 30-500 mm/s.
No, the ACQ40X75ST uses fixed NBR elastomer bumpers at both stroke ends to absorb impact. It is not a field-adjustable air cushion, so for high-speed or high-energy loads, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.