
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X75T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X75T is a double-acting JIS compact air cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly significantly reduces overall axial length compared to traditional round-body units, saving valuable mounting depth inside tight machine envelopes. The hard-anodized aluminum bore ensures low friction and long seal life across the 75 mm travel.
This specific 40 mm bore configuration features a 16 mm piston rod with a female M8x1.25 end thread, accepting NPT1/8 pneumatic piping. Deceleration at both stroke ends relies on fixed NBR elastomer bumpers rather than adjustable air cushions, meaning operators should externally slow high-speed approaches or mount external shock absorbers for heavy loads. The body includes integrated magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X75T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a pneumatic routing flap on a high-speed logistics conveyor to redirect parcels into sorting lanes using 628.3 N of extend force.
Secures aluminum engine blocks during CNC milling operations, utilizing the short 75 mm stroke to maximize machining envelope clearance.
Actuates the side folding mechanism on a continuous motion carton sealer, relying on fixed NBR bumpers to absorb the 30-500 mm/s end impact.
When sizing this 40 mm bore actuator, stepping down to a 32 mm bore yields 402.1 N of push force at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N. The ACQ40X75T hits a solid middle ground for medium-duty positioning tasks. Remember that a plain double-acting compact cylinder does not hold its position if air pressure drops or the directional valve is centered; the rod will drift. For fail-safe load holding, specify an external rod lock or a pilot-operated check valve.
To order this exact configuration correctly, confirm the 40 mm bore, 75 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and that no internal magnet is required. The standard stroke limit for this bore is 100 mm, so a 75 mm travel is a readily available standard option.
Quick checklist
At 0.5 MPa, this 40 mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull. At 0.7 MPa, push increases to 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa with a speed range of 30-500 mm/s.
No, the ACQ40X75T uses fixed NBR elastomer bumpers at each end to decelerate the piston, not an adjustable air cushion. For high kinetic energy loads, you should reduce the approach speed via a flow control or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.