
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X80BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X80BT is a double-acting JIS compact cylinder engineered to deliver a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to conventional round-body units, making it ideal for machinery where space is restricted. This specific configuration features an 80 mm stroke and a NPT1/8 port.
Equipped with a male-thread piston rod end (M14x1.5), it couples directly to your tooling. The bore uses a fixed NBR elastomer bumper at each end to absorb end-stop energy rather than an adjustable air cushion, so high-speed operations may require an external shock absorber. While this unit ships without a sensor magnet, the body retains magnetic-switch grooves for future sensing upgrades. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X80BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives routing flaps on logistics conveyor lines, utilizing the 628.3 N extend force to swiftly push parcels onto adjacent sorting chutes.
Provides a compact 80 mm kick-out stroke for small plastic injection molding machines, saving valuable Z-axis space on the platen.
Actuates mechanical folder arms on continuous motion cartoners, using the male M14x1.5 rod to securely attach custom folding blades.
Selecting this 40 mm bore involves balancing your force requirements against the available footprint. If you need less force, the adjacent 32 mm option yields 402.1 N of push at 0.5 MPa; stepping up to the 50 mm bore provides 981.8 N. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered—the piston will drift, and the NBR bumper only decelerates it near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
When preparing your RFQ, confirm the core ordering attributes: 40 mm bore, 80 mm stroke, NPT1/8 port, male M14x1.5 rod thread (B), and no magnet. Operating speed spans 30-500 mm/s, and the maximum standard stroke for this bore size is 100 mm.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force reaches 879.6 N. The maximum push force is 128 kgf at the 1.0 MPa operating pressure limit.
It relies on a fixed NBR elastomer bumper at each end to absorb shock—it is not an adjustable air cushion. Additionally, it does not hold its load when air is lost; the rod drifts, so an external rod lock or pilot check valve is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.