
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X80SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X80SBT is a double-acting JIS compact cylinder engineered for tight axial spaces. It delivers 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, utilizing a 40 mm bore and an 80 mm stroke. The integrated C-clip and riveted piston-to-rod assembly minimize overall length, saving valuable machine footprint depth compared to standard round-body units.
This specific configuration includes a built-in piston magnet (-S) for position sensing alongside a male-thread piston rod end (-B, M14x1.5) that couples directly to your load. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable air cushions, so for high-energy cycles you should slow the approach or add external shock absorption. The hard-anodized aluminum bore operates at speeds of 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X80SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force at 0.5 MPa to secure aluminum housings during CNC milling operations within a compact machining center envelope.
Uses the 80 mm stroke and male M14x1.5 rod to actuate a routing flap on a logistics conveyor, pushing cartons to secondary packaging lanes.
Drives a materials compression fixture with a steady 527.8 N retract force, relying on the magnetic sensor slots for precise endpoint timing.
When sizing this 40 mm bore, stepping down to the ACQ32X80 yields 402.1 N of push at 0.5 MPa, while stepping up to the ACQ50X80 provides 981.8 N. To finalize your order, confirm the 40 mm bore, 80 mm stroke, NPT1/8 port, the required male M14x1.5 rod thread, and the built-in magnet for AirTAC reed or electronic switches. Note that a plain ACQ body will not hold a load if air pressure drops; the rod drifts and the fixed bumper only decelerates it near the end of travel. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ40X80SBT uses fixed NBR elastomer bumpers at each end to absorb the end stop. It is not an adjustable air cushion or a locking brake, so for high-speed or high-energy loads you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.