
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X80ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X80ST is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body architecture, significantly reducing axial mounting depth compared to round-body alternatives. Driving a 40 mm bore, it provides 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, utilizing a 16 mm piston rod with a female M8x1.25 thread end.
This 80 mm stroke unit incorporates an integrated piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches via body grooves. End-stop energy is managed by a fixed NBR elastomer bumper, which is not field-adjustable, meaning high-speed applications may require external shock absorption or an adjusted approach velocity. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X80ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N push force required to snap corrugated carton blanks open on continuous-flow packaging lines, fitting neatly within tight machine frames.
Executes rapid 80 mm strokes to push secondary packages off a main conveyor belt onto sorting chutes without consuming excessive longitudinal space.
Holds aluminum workpieces firmly against a machining fixture during milling, using the 16 mm rod to maintain steady clamping pressure.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm bore (402.1 N push at 0.5 MPa) for lighter duties, or moving up to the 50 mm bore (981.8 N push at 0.5 MPa) for heavier payloads. To secure your equipment, remember this cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; a fail-safe setup requires an external rod lock or pilot-operated check valve. Ensure your order specifies the 40 mm bore, 80 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the required magnetic switch option.
Quick checklist
This 40 mm bore double-acting cylinder generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
No, the ACQ40X80ST uses a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.