
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X80T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X80T is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. Utilizing a C-clip and riveted piston-to-rod assembly, the body achieves a remarkably short axial footprint, conserving valuable machine depth where a conventional round-body actuator would be too long. This 40 mm bore model operates at speeds between 30 and 500 mm/s.
This specific configuration features an 80 mm stroke and a NPT1/8 port. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The piston rod measures 16 mm in diameter and terminates in a female M8x1.25 thread for straightforward load coupling. While the body includes grooves for magnetic switches, this particular unit ships without a sensor magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X80T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Deploys a diverter arm on a logistics sorting line, utilizing the 628.3 N extend thrust to reliably push cartons weighing up to 60 kg onto secondary chutes.
Secures aluminum engine blocks during machining operations, where the 527.8 N retract force holds the workpiece firmly against a vertical locater pin.
Drives a mechanical folding blade on a corrugated box erecting machine, using the 80 mm stroke to tuck inner flaps prior to adhesive application.
Selecting the ACQ40X80T provides 628.3 N of extending thrust at 0.5 MPa. If your application requires slightly less force, the adjacent Ø32 bore yields 402.1 N of push, whereas stepping up to the Ø50 bore provides 981.8 N for heavier payloads. Keep in mind that this actuator lacks a position lock; if air pressure drops or the directional valve centers, the rod will drift and the NBR bumper only decelerates the piston near the stroke ends. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve. To finalize your order, verify the 40 mm bore, 80 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the absence of the magnetic option.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force reaches 879.6 N. The maximum push force is 128 kgf at the 1.0 MPa operating pressure limit. The cylinder operates at speeds of 30-500 mm/s within a temperature range of -20 to +70 C.
The end-of-travel deceleration is handled by a fixed NBR elastomer bumper, not a field-adjustable air cushion; for high kinetic energy loads, slow the approach or add an external shock absorber. Additionally, while the body has switch grooves, this model lacks the built-in magnet, so you would need to specify the -S option for AirTAC reed or electronic switch integration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.