
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X90SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 90mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X90SBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, utilizing a C-clip and riveted piston-to-rod assembly to minimize axial footprint. At 40mm bore, it generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. The 90mm stroke operates within the 100mm standard limit, while the hard-anodized bore wall ensures long service life.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread rod end (-B). The M14x1.5 male thread couples directly to your tooling, while the integrated magnet works seamlessly with AirTAC reed or electronic switches housed in the body's peripheral grooves. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X90SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing pop-up arms on packaging conveyors, utilizing the 90mm stroke and 628.3 N force to push cartons into secondary processing lanes.
Drives secondary ejector pins on small plastic injection molding machines, where the short compact body saves axial depth and the male M14x1.5 thread secures the ejector plate.
Provides lateral clamping of printed circuit boards during automated wave soldering, using the integrated magnet to confirm clamp engagement to the PLC.
Selecting this 40mm bore involves balancing force and spatial constraints; stepping down to a 32mm bore yields 402.1 N push at 0.5 MPa, whereas stepping up to a 50mm bore provides 981.8 N. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered, as the piston will drift and the fixed bumper only decelerates near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
When ordering, confirm the essentials: 40mm bore, 90mm stroke, NPT1/8 port, the integrated magnet for sensing, and the M14x1.5 male rod thread. Operating speed spans 30-500 mm/s, and if your cycle demands rapid high-energy stops, consider adding an external shock absorber rather than relying solely on the standard NBR bumper.
Quick checklist
This 40mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, speeds of 30-500 mm/s, and temperatures from -20 to +70 C.
Cushioning is provided by a fixed NBR elastomer bumper at each end and cannot be adjusted; for high-energy cycles, slow the approach or use an external shock absorber. The -B option specifies a male M14x1.5 piston rod thread, allowing you to directly thread your load or fixture onto the rod.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.