
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X90ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 90mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X90ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics, utilizing a short C-clip and riveted body design that drastically reduces axial footprint compared to round-body alternatives. Delivering 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, this 40 mm bore unit is built for rigorous actuation. The 90 mm stroke operates within the 100 mm standard limit, maintaining optimal structural stability.
This specific model includes an integrated piston magnet (-S) for direct compatibility with AirTAC reed or electronic switches, fitting neatly into the body's magnetic grooves for precise position detection. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable cushion, meaning high-speed applications may require external shock absorption. The NPT1/8 port and 16 mm rod with a female M8x1.25 thread end ensure straightforward integration into existing setups. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X90ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Ideal for securing aluminum castings inside CNC machining centers, where the 628.3 N extend force at 0.5 MPa firmly locks the part without deforming the profile.
Drives the mechanical arms on automated packaging lines to tuck corrugated carton flaps, utilizing the 90 mm stroke to clear the box path during retraction.
Pivots routing gates on package conveyor systems, where the compact C-clip body saves valuable mounting depth within tight transfer framework.
Selecting the ACQ40X90ST provides a robust middle-ground capacity, but sizing either direction is crucial for efficiency. Stepping down, the 32 mm bore yields 402.1 N push at 0.5 MPa, while stepping up to the 50 mm bore provides 981.8 N, allowing you to fine-tune force output to your exact load. Keep in mind that this cylinder does not hold its position upon air loss or valve centering; the rod will drift, so a fail-safe hold requires an external rod lock or pilot-operated check valve. To order, confirm the 40 mm bore, 90 mm stroke, NPT1/8 port, the required S magnet, and the female M8x1.25 rod thread.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force reaches 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable; for high kinetic energy loads, add an external shock absorber. The rod end features a standard female M8x1.25 thread on a 16 mm rod (a male M14x1.5 thread requires the B option).
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.