
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X100BFAT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X100BFAT is a double-acting single-rod JIS compact cylinder engineered for space-constrained machinery. Its short C-clip and riveted body drastically reduce axial mounting depth compared to round-body units. At 63 mm bore, it generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, making it suitable for heavy-duty positioning tasks.
This specific configuration features a male M18x1.5 threaded piston rod end for direct mechanical coupling, paired with an FA mounting bracket for secure front-face attachment. The body incorporates sensor grooves for positioning switches, though this unit ships without the internal magnet. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at each end to decelerate the stroke. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BFAT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extend force at 0.5 MPa to secure heavy cast iron engine blocks during multi-axis CNC milling operations.
Utilizes the full 100 mm stroke and FA bracket to push corrugated cardboard cartons onto exit conveyors in high-speed packaging lines.
Couples via the male M18x1.5 rod thread to stripper plates, delivering 1401.5 N retract force to extract plastic parts from mold cavities.
When sizing this 63 mm bore unit, consider stepping down to the 50 mm bore for 981.8 N push at 0.5 MPa, or stepping up to the 80 mm bore for 2513.2 N push at 0.5 MPa if your application requires greater thrust. This model provides a 100 mm stroke, utilizes a NPT1/4 port, and includes the male M18x1.5 rod thread and FA bracket.
Remember that a standard ACQ body does not hold its position if air pressure is lost or the control valve is centered; the rod will drift. If your fixture requires fail-safe load holding under pressure loss, you must add an external rod lock or a pilot-operated check valve to the circuit.
Quick checklist
This 63 mm bore double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push force of 318 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in -20 to +70 C environments.
It uses fixed NBR elastomer bumpers at the stroke ends to absorb impact, meaning there is no field-adjustable air cushion; for high energy loads you should externally slow the approach or add a shock absorber. Additionally, it does not inherently hold its load on air loss, so an external rod lock is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.