
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X100BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X100BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to minimize axial footprint where round-body units fail to fit. Delivering a robust 1558.6 N push force at 0.5 MPa, it utilizes a 20 mm piston rod and a NPT1/4 port to drive substantial loads efficiently.
This specific configuration includes a male M18x1.5 rod-end thread for direct mechanical coupling. The unit relies on a fixed NBR elastomer bumper at each end for end-stop deceleration rather than an adjustable air cushion, and while the body features sensor grooves, this variant ships without a magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N of extend force needed to eject finished plastic parts from a 100-ton injection molding machine, utilizing the male thread for secure ejector plate coupling.
Acts as a heavy-duty stop block on a powered roller conveyor, using its 100 mm stroke to extend and halt 50 kg pallets before they reach the wrapping station.
Drives the tailstock or auxiliary clamping turret on a CNC lathe, where the compact 63 mm body saves valuable Z-axis space without sacrificing 318 kgf maximum push capacity.
When sizing your actuator, consider stepping down to the 50 mm bore (981.8 N push @0.5 MPa) for lighter duties, or up to the 80 mm bore (2513.2 N push @0.5 MPa) for heavier demands. Remember that a standard ACQ cylinder will not maintain its position if air pressure drops or the directional valve centers; the piston will drift. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve. To order this exact unit, confirm the 63 mm bore, 100 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and no magnet.
Quick checklist
The ACQ63X100BT generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable. For high cycle speeds, add an external shock absorber. Additionally, it does not hold position on air loss; use an external rod lock if fail-safe holding is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.