
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X100SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X100SBT is a JIS compact double-acting single-rod air cylinder engineered for space-constrained machinery. Its short C-clip and riveted piston-to-rod assembly drastically reduce axial mounting depth compared to round-body units. Delivering 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, it is built for robust actuation within a 63 mm bore footprint.
This specific configuration includes an integrated piston magnet for position sensing with AirTAC reed or electronic switches. It features a male M18x1.5 threaded rod end for direct load coupling, a NPT1/4 port, and fixed NBR elastomer bumpers at both ends to absorb end-stop impact rather than relying on an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X100SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Executes the 100 mm stroke push-off to transfer layered cartons onto a wooden pallet in high-speed end-of-line packaging equipment.
Drives the male M18x1.5 threaded rod directly into an ejector plate to clear formed plastic parts from an injection molding cavity.
Actuates a routing gate on a roller conveyor to divert dense cast metal components into a secondary machining cell.
Operating at the maximum standard stroke of 100 mm for this bore size, the ACQ63X100SBT yields 1558.6 N push at 0.5 MPa. If you need less force, the adjacent 50 mm bore provides 981.8 N push, or you can step up to the 80 mm bore for 2513.2 N push. Keep in mind that a plain compact cylinder drifts when air pressure is lost or the valve centers; the fixed bumper only decelerates the stroke near its limits and does not lock the load. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
To finalize your order, confirm these essentials: 63 mm bore, 100 mm stroke, NPT1/4 air port, male M18x1.5 rod thread (B), and the integrated magnet (S) for switch mounting.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1558.6 N push and 1401.5 N pull. At 0.7 MPa, push increases to 2182 N, with a maximum push of 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and operating temperature spans -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than an adjustable air cushion, so for high energy you should slow the approach or add an external shock absorber. Additionally, it provides no fail-safe locking; if air is lost, the rod drifts and requires an external rod lock to hold position.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.